Facilities > VLA > Documentation > Manuals > Computing Resources > Connecting via VNC

Connecting via VNC

by Gustaaf Van Moorsel last modified Oct 11, 2017 by K Scott Rowe

Accessing the Cluster Remotely with VNC

While ssh will work fine if you are on the internal NRAO network, if you are trying to display things from a remote site we recommend using VNC.

Connect to the NRAO

From your local machine, login to the ssh portal ssh.aoc.nrao.edu with your username (e.g. nm-4386).  Skip this section if you are physically at the NRAO.

For Linux and Mac Machines

ssh nm-4386@ssh.aoc.nrao.edu

For Windows Machines

Install PuTTY, fill in the Host Name field and click Open.

Start the VNC Server

From the ssh portal, or some other NRAO machine, login to the node assigned to you (e.g. nmpost050)

ssh nmpost050

and start a VNC server with the following command

vncserver

The first time you run this, it should prompt you to set a password.  Do not use the same password as your username.  The system should then return something like:

New 'nmpost050:1 (nm-4386)' desktop is nmpost050:1

The 1 in this example is your session.  You will need this number later when you use your VNC client.

Connect to the VNC Server

The VNC Client used to connect to the VNC server is different depending on the OS you are using (Linux/RHEL, Linux/Ubuntu, MacOS)

Linux (RHEL, CentOS, SL, OEL, Debian)

If your local machine is an RHEL or Debian derivative, use vncviewer to start the VNC connection like so (assuming the session number is 1)

vncviewer -via nm-4386@ssh.aoc.nrao.edu nmpost050:1

If you are physically at the NRAO, skip the "-via" syntax like so

vncviewer nmpost050:1

Linux (Ubuntu)

If your local machine is Linux/Ubuntu, use remmina to start the VNC connection like so (assuming the session number is 1)

Launch the remmina program and select Connection -> New

 

Set the Name to something descriptive like NRAO Cluster, change the Protocol to VNC - Virtual Network Computing, set the Server to the node assigned to you followed by a colon and the session number (e.g. nmpost050:1), set the User name (e.g. nm-4386).   Then select the SSH tab

 

Check the box for Enable SSH tunnel, select Custom and set it to ssh.aoc.nrao.edu, set the User name (e.g. nm-4386), click on Save and then Connect.

 

 

Mac

If your local machine is Mac, open a Terminal by opening the Applications folder then the Utilites folder then double-click on the Terminal application. In the terminal, start an SSH tunnel.  In the following examples, 5901 is derived by adding 5900 to the session number from above.

ssh -L 5901:nmpost050:5901 nm-4386@ssh.aoc.nrao.edu

Leave that terminal in the background.  Then in the Finder, Pull down the GO menu and choose Connect to Server. For the server address, specify:

vnc://localhost:5901

You will be challenged for the VNC password you set up (likely at the time you launched the vnc server).

 

Windows

If your local machine is Windows, use a VNC client like the Java Viewer from TightVNC with the following setup.  The port number can be found by adding 5900 to the session number.  So in the above example, with a session number of 1, the port will be 5901.    If you are physically at the NRAO, leave the "SSH Server" line blank.

End the VNC Server

Commands that are run in this VNC session will continue to run even after closing your local VNC client. Once all processes are done, you should close your VNC server by connecting via ssh again to the nmpost cluster node and running (assuming the session number is 1)

vncserver -kill :1