Atmospheric dispersion, implications for phase calibration Abstract
Return to Memo list
ALMA Memo # 590
Atmospheric dispersion and the implications for phase calibration
Emily I. Curtis, Bojan Nikolic, John S. Richer and Juan R. Pardo
2009-12-10
The success of any ALMA phase-calibration strategy, which incorporates phase transfer, depends on a good understanding of how the atmospheric path delay changes with frequency (e.g. Holdaway & Pardo 2001). We explore how the wet dispersive path delay varies for realistic atmospheric conditions at the ALMA site using the ATM transmission code. We find the wet dispersive path delay becomes a significant fraction (5 per cent) of the non-dispersive delay for the high-frequency ALMA bands (¦ 160 GHz, Bands 5 to 10). Additionally, the variation in dispersive path delay across ALMA's 4-GHz contiguous bandwidth is not significant except in Bands 9 and 10. The ratio of dispersive path delay to total column of water vapour does not vary significantly for typical amounts of water vapour, water vapour scale heights and ground pressures above Chajnantor. However, the temperature profile and particularly the ground-level temperature are more important. Given the likely constraints from ALMA's ancillary calibration devices, the uncertainty on the dispersivepath scaling will be around 2 per cent in the worst case and should contribute about 1 per cent overall to the wet path fluctuations at the highest frequencies.
View a pdf version of ALMA Memo #590.
